How Do You Display a Hockey Stick and Pucks?

Two hockey sticks hung level on HIDEit HHockey mounts under a framed jersey and a team pennant

Hang the stick level on the wall at its balance point, and give each puck its own holder beside it. The HIDEit HHockey holds a hockey stick horizontally on one small steel mount, and the HIDEit Puck holds a regulation NHL puck, so the signed stick and the game puck can share one wall.

Below: how the HHockey holds a stick, how to build a full stick wall, where the pucks go, and how it goes up.

Close-up of a hockey stick resting level in a HIDEit HHockey mount with rubber caps

How the HHockey holds a stick

The HIDEit HHockey is a single steel piece that works on the stick's own balance. Find the point where the stick balances, set the mount there, and the stick rests level on the wall. Because that point is often closer to the blade, the stick won't always look centered, and that's expected.

Rubber caps keep the stick from slipping and protect it from scratches. It fits most sticks, including Bauer, CCM, Warrior, Sher-Wood, Easton and Nike, and works with ice, roller, street, field, bandy and goalie sticks. Goalie sticks hang with the blade facing right; the rest can face either way.

Three hockey sticks stacked on the wall on HIDEit HHockey mounts below framed photos and a pennant

Build a stick wall

One HHockey holds one stick, so a wall is just a stack of them. Line them up one above the other and the sticks read like a rack: the signed stick from the game you were at, the one you scored with, the one your kid outgrew.

The HHockey comes as a single, a 3-pack and a 5-pack, so a full wall doesn't mean ordering one at a time. Leave room above and below each stick so the blades don't overlap.

A framed jersey surrounded by bats, gloves, a hockey stick, pucks and a goalie mask on HIDEit wall mounts

Where the pucks go

The HIDEit Puck is a 3-pack of steel holders made for a regulation NHL puck, 1 inch thick and 3 inches across. Each one holds a single puck with a large opening, so a puck comes out for a closer look and goes back in.

Set the pucks near the sticks they belong with, or in a row under a framed jersey. The powder coat protects the puck from scratches, and the holder is small enough that the puck is what you see.

A HIDEit HHockey mount being installed on the wall and a hockey stick set into it

Up in minutes

Both mounts are single pieces of 16-gauge steel with a powder coat finish, and both come with drywall screws and anchors. A Phillips screwdriver is all you need; stud mounting is optional.

For the HHockey, find the balance point first, mark the wall, then mount. For a whole wall, lay the sticks and pucks out on the floor before you drill, so the spacing is right the first time. Want the background? Read the story behind the HHockey.

So, how do you display them?

Hang each stick level at its balance point on a HIDEit HHockey, give each puck its own HIDEit Puck holder, and lay the wall out before you drill. The stick and the puck from the same night end up side by side.

Shop the HHockey: hideit.co/hhockey · Shop hockey mounts: hideit.co/hockey

Frequently Asked Questions

Does the HHockey work with goalie sticks?

Yes. A goalie stick hangs with the blade facing right. Player sticks can face either direction.

Will my stick hang centered on the mount?

Not always. The HHockey holds the stick at its natural balance point, which is often closer to the blade, so the stick hangs level but may sit off-center.

What size puck does the HIDEit Puck hold?

A regulation NHL puck: 1 inch thick and 3 inches in diameter.

Does it work with field hockey sticks?

Yes. The HIDEit HHockey holds field hockey sticks facing left or right, along with ice, roller, street and bandy sticks.

Got a setup like this?

Share it with #afterHIDEit for a chance to win the Monthly Setup Contest.

Share Your Setup About the Contest