Large cable box in steel Adjustable HIDEit Uni-MW Wall Mount
Steel adjustable wall mount for medium + wide-sized electronic devices, made by HIDEit Mounts.
Cable box mounted on the wall behind the TV in a steel adjustable mount made by HIDEit Mounts.
Medium + wide cable box mounted behind the TV in an adjustable wall mount, made by HIDEit Mounts.
Adjustable steel wall mount designed to perfectly fit medium cable boxes, game consoles and satellite receivers.
Universal Medium + Wide Mount adjusts to fit a wide range of devices.
Universal Mount and Adjustable Mount dimensions chart for HIDEit Universal + Adjustable Mounts.
HIDEit Uni-MW | Adjustable Medium+Wide Component Mount
4.8
Rated 4.8 out of 5 stars
4.8 Stars (58 Reviews)

HIDEit Uni-MW | Adjustable Medium+Wide Component Mount

$35.00
Select Option

$5 US Shipping on $100+. Ships from Nevada.

  • Ships in 2 Days
  • 14-Day Returns
  • Secure Checkout

Thanks for choosing our American Small Business!

Pairs With This Mount

Complete the Setup

Mount the gear that goes with it for one clean wall.

HIDEit Uni-VESA Bar

VESA Adapter Bracket for HIDEit Mounts

$15.00

HIDEit Switch

Nintendo Switch Wall Mount

$24.00

Gadgets+

Universal TV Wall Mount 32" - 55"

$45.00

HIDEit 5S

Sony PlayStation PS5 Shelf Mount

$27.00

Adjustable Wall Mount for Medium+Wide Electronic Devices: Video Game Console, Cable Box, Satellite Receiver & More

Take back your living room and HIDE unsightly devices! The HIDEit Uni-MW is adjustable to fit a wide range of components, including the Original Xbox One*! Our Uni-MW Wall Mount is simple to install and thanks to its sleek design, most remotes will still work even with your cable box, satellite box, or game console mounted behind the TV! HIDE your components behind the TV and get the living room setup you’ve always dreamed of!

*For the Original Xbox One, Microsoft didn't equip the disk drive for vertical orientation, which is not a problem if you only download, but if you choose to use discs: go vertical at your own risk.

  • Adjustable to fit a wide range of components.
  • Easy access to buttons and ports.
  • Powder coat finish protects components from scratches.
  • Made in the USA from 16-gauge steel for durability.
Details + Compatibility

Product Name: HIDEit Uni-MW
UPC: 798304245417
Includes: (4) #8 Flat Head Drywall Screws, (4) Drywall Anchors, Thumb Nuts
Dimensions: H 9-13.95 x L 6 (overhang is fine) x D 2.66-3.65 in (22-35 x 15 x 6-9 cm)
Released: 9/2013 | Patented

COMPATIBLE WITH:
•  Cisco Scientific Atlanta: CHS 335 HD Set-Top Box (13.78" x 9.2" x 2.76"); Explorer 8700HDC DVR (12.0" x 9.4" x 2.9")
•  FOXTEL iQ3 (12.6" x 9.45" x 3.15"); iQ4 (12.6" x 9.45" x 3.15")
•  Lenovo ideacentre 300s Desktop 90F10068US (13.23"x11.62"x3.62") Lenovo IdeaCentre Premium High Performance Small Business Desktop (12.6”x11.6"x3.5")
•  Microsoft: Xbox 360 E (10.38" x 10" x 2.63"); Xbox 360 S (10.6" x 10.4" x 3.0"); Xbox 360 (12.15" x 10.15" x 3.27"); Xbox One (13.1" x 10.8" x 3.1") * Xbox One disk drive was not designed for Vertical Orientation
•  Sky TV: Sky box (340mm x 240mm x 75mm | 13.39" x 9.45" x 2.95"); Sky+HD 2TB (351mm x 265mm x 73mm | 13.82" x 10.43" x 2.87")
•  Verizon FiOS: Cisco Scientific Atlanta CHS 335 HD Set-Top Box (13.78" x 9.2" x 2.76"); Arris VMS 1100 (12.6" x 9.1" x 2.6"); Motorola 7100-P2 (12.61" x 8.7" x 2.6") Motorola DCX3200 (10.2" x 6.3" x 1.8")

Don't see your device? No problem! Just measure it and match it to our dimension ranges.

Shipping + Returns
Ships Fast from U.S. Warehouses

Most orders ship within 2 business days. Shipping speed depends on the service + carrier you select. US Economy Shipping can take up to 3 weeks. Shipping times are estimates and not guaranteed.

Return Policy

We want you to love your HIDEit Mount! Returns are accepted within 14 days of delivery for store credit. Items must be unused, in original packaging, and in resalable condition. Customers are responsible for return shipping.

Making Mounts Since 2009

  • Heavy-Duty Steel

    Powder-coated steel protects your gear from scratches.

  • Snug + Secure Fit

    Shaped to fit your exact model, so your gear stays put.

  • Designed in USA

    Every HIDEit mount is designed in the USA.

How to Install
How to Install

It might seem difficult to install a HIDEit Mount, but luckily it isn’t! We provide all the necessary hardware; all you need to bring is a few tools and a keen eye for how you want your setup to look. Here’s everything you need to know about how to install a mount for a clean, professional setup.

*** Before you start, be sure to plan out your setup, remove any discs and unplug power from all components, including your TV. ***

1. Gather your tools - Drill with 3/16" drill bit (if you have one), stud finder, level, Phillips-head screwdriver, pencil, damp paper towel, and your HIDEit Hardware.

2. Determine mount location(s) - Make sure to leave space for all of your cords. To reiterate, remove discs from all devices, test your cable box for remote function. Use a level and mark your holes. Depending on the location of your install, you may need to remove your TV.

3. Check for studs - When possible, mount one side into a stud. When stud mounting do not drill pilot hole. If there's no stud, use the drywall anchors included with your mount.

Install Tip - For holes into a stud, use a mounting screw to create holes. A 3/16" drill bit is too large.

Install Tip - For holes into drywall, drill holes using a 3/16" drill bit. Hold a damp paper towel against the wall a few inches below the drill bit to catch any debris (if it's too close, it could get caught in the drill bit). No drill? Just use the mounting screw to create a pilot hole. Insert the provided drywall anchors.

4. Line up your HIDEit Mount with the anchors - Attach with provided screws and HAND tighten to prevent damage. Slide your component into your HIDEit Mount.

5. Insert your devices - We recommend to slowly insert your devices. All of our mounts are powder-coated for protection, but it's always best to be safe than sorry! Connect all the cables!

Install Tip - Don't forget to tidy up those cords!

Specific mounting instructions are listed on each product under the "How to Install" tab.

You’ve now expertly installed your HIDEit Mount! Our mounts should only take five minutes or less to install. But don’t be afraid to take longer to prep, plan and get it perfect for your setup! Now, sit back, relax and enjoy your work!

Open the full install page ›

Your Questions, Answered

I’m looking to mount this in a public place. Do you have a locking mount?

Yes! You can use the Uni-MW with our Theft Deterrent Add-On to prevent theft in public places.

Can I VESA mount this to the back of my TV?

Unfortunately this mount cannot be VESA mounted to the back of your TV. If your TV is already wall-mounted, you can use this mount plus 2 VESA Adapter Bars to attach it to the back of your TV.

Can this mount be mounted to a brick, concrete or stone wall?

Absolutely, but different mounting hardware may be required.

Which devices will work with this mount?

As this is a universal wall mount, many devices are compatible! This mount is most often used as a cable box wall mount, computer wall mount or DVD wall mount!

Will the remote still work?

Yes! Infrared, RF and Bluetooth signals will still work with the device mounted behind the TV, so you can ditch the cable box shelf!

#afterHIDEit

Real Setups. Real Installs.

  • Customer living room with the TV and soundbar on the wall and the devices mounted out of sight
  • Customer's Apple TV 4K mounted on the wall beside a backlit TV
  • Customer's Mac mini mounted on the back of a monitor
  • Customer's cable box mounted behind a wall-mounted TV
  • Customer's cable box and Xbox One X mounted behind a backlit TV
  • Customer's tablet mounted on the wall of an RV
  • Customer's device mounted behind a TV on a wood-tile wall
  • Cable box mounted behind a TV on a shiplap wall
  • Apple TV mounted behind a wall-mounted TV, installed by an AV pro
  • Cable box mounted out of sight behind a TV, installed by an AV pro
  • Cable box mounted behind a TV showing a mountain lake, installed by an AV pro
  • Cable box mounted beside a TV above a fireplace, installed by an AV pro

Real setups from customers and the AV pros who install HIDEit. Share yours and you're entered in #afterHIDEit, our monthly setup contest.

#afterHIDEit Contest

Reviews

4.8
★★★★★ Based on 58 reviews
  • 5 0
  • 4 0
  • 3 0
  • 2 0
  • 1 0
Write a Review

Loading reviews...

What's Trending

Shop Best Sellers
HIDEit Switch 2 HIDEit Switch 2Nintendo Switch 2 Wall Mount$30.00 HIDEit PS5 HIDEit PS5Sony PlayStation 5 and PS5 Pro MountFrom $31.00 HIDEit HBat HIDEit HBatHorizontal Baseball Bat MountFrom $22.00 HIDEit Series X HIDEit Series XMicrosoft Xbox Series X MountFrom $32.00
Shop Best Sellers

Tech Setup Ideas + How-Tos

How-to + tips

Best Apple TV Mount for Any Setup: Wall, Behind TV, or VESA (All Generations Covered)

Hide the clutter and level up your setup with a sleek Apple TV mount. Clean look, better airflow,...
Read the story ›
News

Is HIDEit Better Than Amazon Brands?

Wondering if HIDEit is better than Amazon brands like TotalMount? Learn which console mount is stronger, easier to...
Read the story ›
Inside Story

THE INSIDE STORY: HIDEit Mac Mini Mount Collection

With the launch of the Mac mini 2018, we thought we would take you on a trip down...
Read the story ›
Inside Story

THE INSIDE STORY: HIDEit Universal Soundbar Mount

Finding a place for your TV soundbar isn't easy. Maximize space with the HIDEit Uni-SBR Wall Mount, and...
Read the story ›
Visit the HIDEit Blog

Since 2009

The HIDEit Story

What do you get when you add a Nintendo Wii, a few glasses of wine and a blow torch together? Usually a recipe for disaster. But in our case, it was different.

Read Our Story
Rey and Chuck of HIDEit in front of a HIDEit game wall
Read Our Story