HIDEit Wall Mount for ClickShare CX-50 Wireless Presentation System
Barco ClickShare CX-50 greyed out in the HIDEit Barco CX50 Wall Mount. Keep your Barco Clickshare device organized when mounted to the wall.
The HIDEit CX 50 Mount can wall mount or VESA mount a ClickShare CX50 to the back of a monitor.
The custom wrap design of the HIDEit Barco CX50 Wall Mount perfectly holds the Barco ClickShare wireless presentation system without adding bulk to the Barco Device.
The HIDEit Wall Mount for Barco ClickShare CX-50 is made from steel and won't interfere with WiFi for seamless presentations.
The HIDEit Wall Mount for ClickShare CX-50 device is easy to install. Drill not required for installation.
HIDEit Mounts Wall Mount Bundle for Barco devices includes a wall mount for the ClickShare CX 50 Presentation Devices and a wall mount for 2 ClickShare Buttons.

HIDEit CX50 | Barco ClickShare CX-50 Wall Mount

$45.00
Compatible with: Barco CX-50 Article Numbers: R9861522CN, R9861522EU, R9861522NA, R9861522RW, R9861522US, R9861522ZH (39mm x 200mm x 202mm), ClickShare CX-50 1st generation + 2nd generation.
NOT for Barco CX-20 and Barco CX-30, Barco CSE-200+. Use Uni-S Mount. Barco CSE-100, Barco CSE-100 Huddle (205mm x 115mm x 45mm)
Select Option

$5 US Shipping on $100+. Ships from Nevada.

  • Ships in 2 Days
  • 14-Day Returns
  • Secure Checkout

Thanks for choosing our American Small Business!

Pairs With This Mount

Complete the Setup

Mount the gear that goes with it for one clean wall.

HDMI Cord - 1.5 Foot

$6.00

Gadgets+

Universal TV Wall Mount 32" - 55"

$45.00

HIDEit ATV4K 3G

(2022) Apple TV 4K 3rd Generation Wall Mount

$17.00

HIDEit Micro

Dell OptiPlex Micro PC Wall Mount

$31.00

Mount for Barco ClickShare CX-50 1st Generation and 2nd Generation Wireless Presentation System

Keep meetings organized with the HIDEit CX50 Mount! Quickly and easily install the Barco ClickShare CX-50 device in a conference room to prepare for your next presentation. Our CliskShare Mount easily installs under a conference table, on a wall or directly to the back of a display for location flexibility and ease of service. The sleek, custom wrap design doesn’t add bulk, won’t block ports or interfere with Wi-Fi. Plus, it’s made of heavy-gauge steel for added strength and dependability. Your wireless presentation has never been easier with the HIDEit CX50 Wall Mount!

  • Wall, under-desk or VESA mount (100mm).
  • Combine with VESA Bar for wall or ceiling mounted TVs.
  • Conveniently slides in and out of mount.
  • Easy access to ports + cables. Won't interfere with Wi-Fi.
Details + Compatibility

Product Name: HIDEit CX50
UPC: 850017013902; Bundle BARCOCX50BUNDLE
Includes: (2) #8 Flat Head Drywall Screws, (2) Drywall Anchors, (2) M4 and (1) M6 VESA Screws
Dimensions: H 6.77 x L 7.99 x D 1.62 in (171.9 x 202.9 x 41.1 mm)
Released: 8/2023

COMPATIBLE WITH: Barco CX-50 Article Numbers: R9861522CN, R9861522EU, R9861522NA, R9861522RW, R9861522US, R9861522ZH (39mm x 200mm x 202mm), ClickShare CX-50 1st generation + 2nd generation.

NOT COMPATIBLE WITH: Barco CX-20 and Barco CX-30, Barco CSE-200+. Use Uni-S Mount. Barco CSE-100, Barco CSE-100 Huddle (205mm x 115mm x 45mm)

Shipping + Returns
Ships Fast from U.S. Warehouses

Most orders ship within 2 business days. Shipping speed depends on the service + carrier you select. US Economy Shipping can take up to 3 weeks. Shipping times are estimates and not guaranteed.

Return Policy

We want you to love your HIDEit Mount! Returns are accepted within 14 days of delivery for store credit. Items must be unused, in original packaging, and in resalable condition. Customers are responsible for return shipping.

Making Mounts Since 2009

  • Heavy-Duty Steel

    Powder-coated steel protects your gear from scratches.

  • Snug + Secure Fit

    Shaped to fit your exact model, so your gear stays put.

  • Designed in USA

    Every HIDEit mount is designed in the USA.

How to Install
How to Install

It might seem difficult to install a HIDEit Mount, but luckily it isn’t! We provide all the necessary hardware; all you need to bring is a few tools and a keen eye for how you want your setup to look. Here’s everything you need to know about how to install a mount for a clean, professional setup.

*** Before you start, be sure to plan out your setup, remove any discs and unplug power from all components, including your TV. ***

1. Gather your tools - Drill with 3/16" drill bit (if you have one), stud finder, level, Phillips-head screwdriver, pencil, damp paper towel, and your HIDEit Hardware.

2. Determine mount location(s) - Make sure to leave space for all of your cords. To reiterate, remove discs from all devices, test your cable box for remote function. Use a level and mark your holes. Depending on the location of your install, you may need to remove your TV.

3. Check for studs - When possible, mount one side into a stud. When stud mounting do not drill pilot hole. If there's no stud, use the drywall anchors included with your mount.

Install Tip - For holes into a stud, use a mounting screw to create holes. A 3/16" drill bit is too large.

Install Tip - For holes into drywall, drill holes using a 3/16" drill bit. Hold a damp paper towel against the wall a few inches below the drill bit to catch any debris (if it's too close, it could get caught in the drill bit). No drill? Just use the mounting screw to create a pilot hole. Insert the provided drywall anchors.

4. Line up your HIDEit Mount with the anchors - Attach with provided screws and HAND tighten to prevent damage. Slide your component into your HIDEit Mount.

5. Insert your devices - We recommend to slowly insert your devices. All of our mounts are powder-coated for protection, but it's always best to be safe than sorry! Connect all the cables!

Install Tip - Don't forget to tidy up those cords!

Specific mounting instructions are listed on each product under the "How to Install" tab.

You’ve now expertly installed your HIDEit Mount! Our mounts should only take five minutes or less to install. But don’t be afraid to take longer to prep, plan and get it perfect for your setup! Now, sit back, relax and enjoy your work!

Open the full install page ›

Your Questions, Answered

Is this the right mount for my Barco ClickShare?

This mount was designed for the Barco ClickShare CX-50. For the Barco CX-20 or CX-30, you'll need the HIDEit CX Mount. CSE-200, CS-100 and CS-100 Huddle, you'll need the HIDEit CSE. Other Barco devices will require a different HIDEit Mount.

What if my monitor or TV isn't wall mounted?

No problem! You can VESA mount your ClickShare directly to the back of your monitor using the 100mm VESA hole pattern + provided VESA M4 or M6 screws.

What are the screws for?

The drywall anchors and screws are for wall mounting your Barco ClickShare, while the included M4 and M6 screws are for VESA mounting your Barco device directly to the back of your monitor or TV.

#afterHIDEit

Real Setups. Real Installs.

  • Customer living room with the TV and soundbar on the wall and the devices mounted out of sight
  • Customer's Apple TV 4K mounted on the wall beside a backlit TV
  • Customer's Mac mini mounted on the back of a monitor
  • Customer's cable box mounted behind a wall-mounted TV
  • Customer's cable box and Xbox One X mounted behind a backlit TV
  • Customer's tablet mounted on the wall of an RV
  • Customer's device mounted behind a TV on a wood-tile wall
  • Cable box mounted behind a TV on a shiplap wall
  • Apple TV mounted behind a wall-mounted TV, installed by an AV pro
  • Cable box mounted out of sight behind a TV, installed by an AV pro
  • Cable box mounted behind a TV showing a mountain lake, installed by an AV pro
  • Cable box mounted beside a TV above a fireplace, installed by an AV pro

Real setups from customers and the AV pros who install HIDEit. Share yours and you're entered in #afterHIDEit, our monthly setup contest.

#afterHIDEit Contest

Be the First to Review

Own this mount? Tell other shoppers how it went.

Write a Review

What's Trending

Shop Best Sellers
HIDEit Switch 2 HIDEit Switch 2Nintendo Switch 2 Wall Mount$30.00 HIDEit PS5 HIDEit PS5Sony PlayStation 5 and PS5 Pro MountFrom $31.00 HIDEit HBat HIDEit HBatHorizontal Baseball Bat MountFrom $22.00 HIDEit Series X HIDEit Series XMicrosoft Xbox Series X MountFrom $32.00
Shop Best Sellers

Tech Setup Ideas + How-Tos

How-to + tips

Best Apple TV Mount for Any Setup: Wall, Behind TV, or VESA (All Generations Covered)

Hide the clutter and level up your setup with a sleek Apple TV mount. Clean look, better airflow,...
Read the story ›
News

Is HIDEit Better Than Amazon Brands?

Wondering if HIDEit is better than Amazon brands like TotalMount? Learn which console mount is stronger, easier to...
Read the story ›
Inside Story

THE INSIDE STORY: HIDEit Mac Mini Mount Collection

With the launch of the Mac mini 2018, we thought we would take you on a trip down...
Read the story ›
Inside Story

THE INSIDE STORY: HIDEit Universal Soundbar Mount

Finding a place for your TV soundbar isn't easy. Maximize space with the HIDEit Uni-SBR Wall Mount, and...
Read the story ›
Visit the HIDEit Blog

Since 2009

The HIDEit Story

What do you get when you add a Nintendo Wii, a few glasses of wine and a blow torch together? Usually a recipe for disaster. But in our case, it was different.

Read Our Story
Rey and Chuck of HIDEit in front of a HIDEit game wall
Read Our Story