DISH Wally shown securely held in the new HIDEit Wally Receiver Mount.
Greyed out DISH Wally Receiver mounted in the HIDEit DISH Wally Mount for the DISH Wally Receiver.
HIDEit Wally Receiver can be wall mounted in RVs and campers or VESA mounted to the back of a wall mounted TV.
Unique coax channel locks the DISH Wally Receiver in place in the HIDEit Wall Mount for Wally Receiver
HIDEit Wally Receiver Mount stores your Wally Receiver with easy access to buttons and ports, without interfering with Wi-Fi signals.
Its easy to slide the DISH Network Wally Receiver in the HIDEit Wally Receiver Mount and install on the wall.
Gif showing easy installation of the HIDEit DISH Wally Receiver Wall Mount. Just 3 easy steps to install!
5.0
Rated 5.0 out of 5 stars
5.0 Stars (10 Reviews)

HIDEit Wally | DISH Wally Receiver Mount

$35.00

$5 US Shipping on $100+. Ships from Nevada.

  • Ships in 2 Days
  • 14-Day Returns
  • Secure Checkout

Thanks for choosing our American Small Business!

Pairs With This Mount

Complete the Setup

Mount the gear that goes with it for one clean wall.

HIDEit Star

Starlink Gen 2 Wall Mount

$35.00

Gadgets+

Universal TV Wall Mount 32" - 55"

$45.00

HIDEit Uni-VESA Bar

VESA Adapter Bracket for HIDEit Mounts

$15.00

HIDEit Switch

Nintendo Switch Wall Mount

$24.00

Cable Box Wall Mount, VESA Mount, Under-Shelf Mount for DISH Wally Receiver

Do you use a DISH Wally receiver in your RV, camper or boat? MOUNTit with the help of the new HIDEit Wally Receiver Mount. The Wally Mount is the perfect solution to free up valuable shelf space. The custom wrap design won’t block Wi-Fi, buttons, or the DISH Smartcard and is made from 16-gauge, powder-coated steel for strength and durability. Our unique coax channel ensures a secure fit, so the device won’t move around while your vehicle's in motion. The mount is easy to install and can be VESA, under-shelf, or wall mounted to fit any space. Keep your DISH Wally safe while you're on-the-go with the HIDEit Wally Mount!

  • VESA Compatible: 100mm + 200mm (M4), single M4 + M6 hole.
  • Coax channel "locks" Wally in place while in motion.
  • Easy access to ports, buttons, and the DISH Smartcard.
  • Doesn't interfere with RF sensor. Test location before setup.
Details + Compatibility

DISH Wally Receiver not included. DISH Wally® is a registered trademark of DISH Network.

Product Name: HIDEit Wally
UPC: 850017013445
Includes: (2) #8 Flat Head Drywall Screws, (2) Drywall Anchors, (2) M4 and (2) M6 VESA Screws
Dimensions: H 10.61 x L 7.03 x D 1.72 in (269.5 x 178.6 x 43.7 mm)
Released: 4/2021 | Copyrighted

COMPATIBLE WITH: DISH Wally HD Receiver (H 1.6 x L 10.41 x D 8.11 in)

Shipping + Returns
Ships Fast from U.S. Warehouses

Most orders ship within 2 business days. Shipping speed depends on the service + carrier you select. US Economy Shipping can take up to 3 weeks. Shipping times are estimates and not guaranteed.

Return Policy

We want you to love your HIDEit Mount! Returns are accepted within 14 days of delivery for store credit. Items must be unused, in original packaging, and in resalable condition. Customers are responsible for return shipping.

Making Mounts Since 2009

  • Heavy-Duty Steel

    Powder-coated steel protects your gear from scratches.

  • Snug + Secure Fit

    Shaped to fit your exact model, so your gear stays put.

  • Designed in USA

    Every HIDEit mount is designed in the USA.

How to Install
How to Install

It might seem difficult to install a HIDEit Mount, but luckily it isn’t! We provide all the necessary hardware; all you need to bring is a few tools and a keen eye for how you want your setup to look. Here’s everything you need to know about how to install a mount for a clean, professional setup.

*** Before you start, be sure to plan out your setup, remove any discs and unplug power from all components, including your TV. ***

1. Gather your tools - Drill with 3/16" drill bit (if you have one), stud finder, level, Phillips-head screwdriver, pencil, damp paper towel, and your HIDEit Hardware.

2. Determine mount location(s) - Make sure to leave space for all of your cords. To reiterate, remove discs from all devices, test your cable box for remote function. Use a level and mark your holes. Depending on the location of your install, you may need to remove your TV.

3. Check for studs - When possible, mount one side into a stud. When stud mounting do not drill pilot hole. If there's no stud, use the drywall anchors included with your mount.

Install Tip - For holes into a stud, use a mounting screw to create holes. A 3/16" drill bit is too large.

Install Tip - For holes into drywall, drill holes using a 3/16" drill bit. Hold a damp paper towel against the wall a few inches below the drill bit to catch any debris (if it's too close, it could get caught in the drill bit). No drill? Just use the mounting screw to create a pilot hole. Insert the provided drywall anchors.

4. Line up your HIDEit Mount with the anchors - Attach with provided screws and HAND tighten to prevent damage. Slide your component into your HIDEit Mount.

5. Insert your devices - We recommend to slowly insert your devices. All of our mounts are powder-coated for protection, but it's always best to be safe than sorry! Connect all the cables!

Install Tip - Don't forget to tidy up those cords!

Specific mounting instructions are listed on each product under the "How to Install" tab.

You’ve now expertly installed your HIDEit Mount! Our mounts should only take five minutes or less to install. But don’t be afraid to take longer to prep, plan and get it perfect for your setup! Now, sit back, relax and enjoy your work!

Open the full install page ›

Your Questions, Answered

Is this mount able to be wall mounted in an RV, boat or trailer?

Yes! Our unique coax channel ensures a secure fit, so the device won’t move around while your vehicle's in motion.

#afterHIDEit

Real Setups. Real Installs.

  • Customer living room with the TV and soundbar on the wall and the devices mounted out of sight
  • Customer's Apple TV 4K mounted on the wall beside a backlit TV
  • Customer's Mac mini mounted on the back of a monitor
  • Customer's cable box mounted behind a wall-mounted TV
  • Customer's cable box and Xbox One X mounted behind a backlit TV
  • Customer's tablet mounted on the wall of an RV
  • Customer's device mounted behind a TV on a wood-tile wall
  • Cable box mounted behind a TV on a shiplap wall
  • Apple TV mounted behind a wall-mounted TV, installed by an AV pro
  • Cable box mounted out of sight behind a TV, installed by an AV pro
  • Cable box mounted behind a TV showing a mountain lake, installed by an AV pro
  • Cable box mounted beside a TV above a fireplace, installed by an AV pro

Real setups from customers and the AV pros who install HIDEit. Share yours and you're entered in #afterHIDEit, our monthly setup contest.

#afterHIDEit Contest

Reviews

5.0
★★★★★ Based on 10 reviews
  • 5 0
  • 4 0
  • 3 0
  • 2 0
  • 1 0
Write a Review

Loading reviews...

What's Trending

Shop Best Sellers
HIDEit Switch 2 HIDEit Switch 2Nintendo Switch 2 Wall Mount$30.00 HIDEit PS5 HIDEit PS5Sony PlayStation 5 and PS5 Pro MountFrom $31.00 HIDEit HBat HIDEit HBatHorizontal Baseball Bat MountFrom $22.00 HIDEit Series X HIDEit Series XMicrosoft Xbox Series X MountFrom $32.00
Shop Best Sellers

Tech Setup Ideas + How-Tos

How-to + tips

Best Apple TV Mount for Any Setup: Wall, Behind TV, or VESA (All Generations Covered)

Hide the clutter and level up your setup with a sleek Apple TV mount. Clean look, better airflow,...
Read the story ›
News

Is HIDEit Better Than Amazon Brands?

Wondering if HIDEit is better than Amazon brands like TotalMount? Learn which console mount is stronger, easier to...
Read the story ›
Inside Story

THE INSIDE STORY: HIDEit Mac Mini Mount Collection

With the launch of the Mac mini 2018, we thought we would take you on a trip down...
Read the story ›
Inside Story

THE INSIDE STORY: HIDEit Universal Soundbar Mount

Finding a place for your TV soundbar isn't easy. Maximize space with the HIDEit Uni-SBR Wall Mount, and...
Read the story ›
Visit the HIDEit Blog

Since 2009

The HIDEit Story

What do you get when you add a Nintendo Wii, a few glasses of wine and a blow torch together? Usually a recipe for disaster. But in our case, it was different.

Read Our Story
Rey and Chuck of HIDEit in front of a HIDEit game wall
Read Our Story