HIDEit Mounts Wall Mount Bundle for the Oculus Meta Quest 2 Virtual Reality Headset and Meta Quest 2 Controllers.
HIDEit Wall Mounts for Oculus Quest VR Headset and Oculus Touch Controllers
Use the new HIDEit Wall Mount for the Oculus Quest VR Headset to HIDEit or DISPLAYit next to your TV. Safely store your VR Gear.
Rubber dipped tabs keep the Oculus Touch controllers secure while the added tab on the headset mount keeps the Oculus VR headset safe.
The HIDEit Oculus Quest 2 Wall Mount and Oculus Touch Controller Wall Mounts are easy to install. Drill not required.
Wall mount the Oculus Quest 2 VR Headset and Oculus Quest 2 controllers behind the TV for a sleek, organized gaming setup.
5.0
Rated 5.0 out of 5 stars
5.0 Stars (21 Reviews)

HIDEit Oculus | Oculus Quest 2 Wall Mount Bundle

$20.00 $35.00
Compatible with: Oculus Quest Headset, Oculus Quest 2 Headset, Oculus Touch Controllers
NOT for Meta Quest 3, VIVE Pro 2, VIVE Controllers, HTC VIVE Focus 3, PlayStation Move Controllers

$5 US Shipping on $100+. Ships from Nevada.

  • Ships in 2 Days
  • 14-Day Returns
  • Secure Checkout

Thanks for choosing our American Small Business!

Pairs With This Mount

Complete the Setup

Mount the gear that goes with it for one clean wall.

HIDEit Uni-C

Universal Controller Wall Mount

$10.00

HIDEit Uni-H

Universal Headset Wall Mount

$15.00

HIDEit Switch

Nintendo Switch Wall Mount

$24.00

HIDEit 5S

Sony PlayStation PS5 Shelf Mount

$27.00

Oculus Quest 2 Wall Mounts for Quest VR Headset + Touch Controllers

Finish playing Beat Saber and need to store your Oculus Quest 2 VR Headset? The HIDEit Oculus Mounts are the perfect solution to organize your gear and take your setup into a new reality. Avoid bulky VR display stands. Our minimalist design keeps the focus on your VR set and allows you to mount your gear just about anywhere! The Universal Headset Mount safely stores the virtual reality display and the tab keeps it in place to avoid accidental drops or damage. The Oculus Touch Controller Mounts are rubber dipped to prevent sliding and scratches when placing controllers on and off the mounts. Complete your VR setup with the HIDEit Oculus Mounts!

  • 3-piece bundle: (1) Uni-H Mount for VR Headset, (2) Touch Controller Mounts.
  • Wall or desk mount to organize VR setup.
  • Uni-H tab holds Oculus headset in place.
  • Rubber dipped controller mounts prevent slipping.
Details + Compatibility

Oculus Quest 2 and Touch Controllers are sold separately. Oculus® is the trademark of Facebook.

Product Name: HIDEit Oculus Bundle
UPC: 850017013452
Includes: (1) Uni-H Mount for VR Headset, (2) Touch Controller Mounts, (6) #8 Flat Head Drywall Screws, (6) Drywall Anchors
Dimensions: Uni-H: H 4.5 x L 3.0 x D 2.0 in (114.3 x 76.2 x 50.8 mm), Clip: H 1.81 x L 1.22 x D 0.83 in (H 45.9 x L 30.9 x D 21.1 mm)
Released: 7/2021 | Copyrighted

COMPATIBLE WITH: Oculus Quest Headset, Oculus Quest 2 Headset, Oculus Touch Controllers
NOT COMPATIBLE WITH: Meta Quest 3, VIVE Pro 2, VIVE Controllers, HTC VIVE Focus 3, PlayStation Move Controllers

Shipping + Returns
Ships Fast from U.S. Warehouses

Most orders ship within 2 business days. Shipping speed depends on the service + carrier you select. US Economy Shipping can take up to 3 weeks. Shipping times are estimates and not guaranteed.

Return Policy

We want you to love your HIDEit Mount! Returns are accepted within 14 days of delivery for store credit. Items must be unused, in original packaging, and in resalable condition. Customers are responsible for return shipping.

Making Mounts Since 2009

  • Heavy-Duty Steel

    Powder-coated steel protects your gear from scratches.

  • Snug + Secure Fit

    Shaped to fit your exact model, so your gear stays put.

  • Designed in USA

    Every HIDEit mount is designed in the USA.

How to Install
How to Install

It might seem difficult to install a HIDEit Mount, but luckily it isn’t! We provide all the necessary hardware; all you need to bring is a few tools and a keen eye for how you want your setup to look. Here’s everything you need to know about how to install a mount for a clean, professional setup.

*** Before you start, be sure to plan out your setup, remove any discs and unplug power from all components, including your TV. ***

1. Gather your tools - Drill with 3/16" drill bit (if you have one), stud finder, level, Phillips-head screwdriver, pencil, damp paper towel, and your HIDEit Hardware.

2. Determine mount location(s) - Make sure to leave space for all of your cords. To reiterate, remove discs from all devices, test your cable box for remote function. Use a level and mark your holes. Depending on the location of your install, you may need to remove your TV.

3. Check for studs - When possible, mount one side into a stud. When stud mounting do not drill pilot hole. If there's no stud, use the drywall anchors included with your mount.

Install Tip - For holes into a stud, use a mounting screw to create holes. A 3/16" drill bit is too large.

Install Tip - For holes into drywall, drill holes using a 3/16" drill bit. Hold a damp paper towel against the wall a few inches below the drill bit to catch any debris (if it's too close, it could get caught in the drill bit). No drill? Just use the mounting screw to create a pilot hole. Insert the provided drywall anchors.

4. Line up your HIDEit Mount with the anchors - Attach with provided screws and HAND tighten to prevent damage. Slide your component into your HIDEit Mount.

5. Insert your devices - We recommend to slowly insert your devices. All of our mounts are powder-coated for protection, but it's always best to be safe than sorry! Connect all the cables!

Install Tip - Don't forget to tidy up those cords!

Specific mounting instructions are listed on each product under the "How to Install" tab.

You’ve now expertly installed your HIDEit Mount! Our mounts should only take five minutes or less to install. But don’t be afraid to take longer to prep, plan and get it perfect for your setup! Now, sit back, relax and enjoy your work!

Open the full install page ›

Your Questions, Answered

Will this bundle work for the Meta Quest 3?

Unfortunately, the Touch Controller Mounts will not fit the Meta Quest 3 Controllers. The Uni-H Headset Mount will work for the Meta Quest 3 VR headset and can be purchased separately.

Will this bundle work for the PSVR?

We recommend purchasing our HIDEit PSVR Bundle which includes a mount for the PSVR headset and processor unit. We also have an option with mounts for the Move Controllers.

#afterHIDEit

Real Customers. Real Setups.

  • Customer's PS5 mounted on the wall beside a wall-mounted TV
  • Customer's PS5 and Xbox Series X mounted beside a TV
  • Customer game room with a wall of TVs and mounted PS5, PS4, Xbox Series X and S, Switch and controllers
  • Customer's PS5 mounted next to a TV with blue backlighting
  • Customer's Nintendo Switch 2 dock mounted under a framed Zelda poster
  • Customer's PS5 Slim and DualSense controller mounted beside a backlit TV
  • Customer media wall with mounted headsets and controllers around a backlit TV
  • Customer TV wall on wood paneling with the console mounted out of sight
  • Customer's PS5 Slim, Switch 2 and controller mounted on a white wall beside the TV
  • Customer game room with a PS5, Switch 2 and a row of mounted controllers
  • Customer game room with two TVs and a neon controller sign
  • Customer's row of mounted controllers on a yellow striped wall beside the TV

Every setup here belongs to a real customer. Share yours and you're entered in #afterHIDEit, our monthly setup contest.

#afterHIDEit Contest

Reviews

5.0
★★★★★ Based on 21 reviews
  • 5 0
  • 4 0
  • 3 0
  • 2 0
  • 1 0
Write a Review

Loading reviews...

What's Trending

Shop Best Sellers
HIDEit Switch 2 HIDEit Switch 2Nintendo Switch 2 Wall Mount$30.00 HIDEit PS5 HIDEit PS5Sony PlayStation 5 and PS5 Pro MountFrom $31.00 HIDEit HBat HIDEit HBatHorizontal Baseball Bat MountFrom $22.00 HIDEit Series X HIDEit Series XMicrosoft Xbox Series X MountFrom $32.00
Shop Best Sellers

Gaming Room Ideas + How-Tos

How-to + tips

How to Build a Floating Gamer Wall

This is the part people screenshot and send to their group chat — each console sliding into its...
Read the story ›
Setup ideas

Can You Mount a Console or PC Without Drilling Into the Wall?

VESA sets the standard hole pattern on the back of almost every monitor and TV — the same...
Read the story ›
Setup ideas

Pegboard Gaming Setup: Mount Your Gear Without Drilling Into the Wall

A pegboard gaming setup uses a wall-mounted pegboard panel as a flexible mounting surface for gaming gear
Read the story ›
Setup ideas

Brand New Day. Brand New Wall.

Spider-Man: Brand New Day is in theaters this week. And Insomniac justdropped the Fresh Start suit into Marvel's...
Read the story ›
Visit the HIDEit Blog

Since 2009

The HIDEit Story

What do you get when you add a Nintendo Wii, a few glasses of wine and a blow torch together? Usually a recipe for disaster. But in our case, it was different.

Read Our Story
Rey and Chuck of HIDEit in front of a HIDEit game wall
Read Our Story