Universal Soundbar Mount Installation Guide

Easy to follow instructions for installing our Universal Sound Bar Wall Mount brackets. Follow the steps below.


How to Tape Template to Wall:


1. Identify the counterpoint of the bottom of the TV.

HIDEit Keyboard mount and Steam Deck mount comes with anti-slip foam pads.
2. Align the CENTER line on the template with the counterpoint of your TV in your desired location.*

The foam pads can be placed on the feet, base and arms of the HIDEit Key Mount.
3. Use the TOP OF SOUNDBAR line to level the template. Tape template ends to wall as flat as possible.

Remove the backing of the foam pads and stick to the feet of the HIDEit Key Mount.

How to Attach Brackets (Mounts) to Wall:


1. Drill pilot holes through the cross-hair circles (4 corners of each mount) using 7/32” drill bit.

Apply foam pads to prevent scratches or slipping of your custom keyboard, mechanical keyboard or Steam Deck.
2. Remove the template from the wall.

Place your handheld gaming console on the HIDEit Keyboard Mount.
3. Add anchors to drilled holes.

Apply foam pads to prevent scratches or slipping of your custom keyboard, mechanical keyboard or Steam Deck.
4. Attach each bracket with provided screws.

Attach each bracket with provided screws

How to Attach Soundbar to Brackets:


1. Insert the provided bolts into back of soundbar.

Apply foam pads to prevent scratches or slipping of your custom keyboard, mechanical keyboard or Steam Deck.
2. Insert bolts into the bracket’s keyholes.

Place your handheld gaming console on the HIDEit Keyboard Mount.
3. Slide soundbar to the right to center under TV.**

Apply foam pads to prevent scratches or slipping of your custom keyboard, mechanical keyboard or Steam Deck.

*If your TV is flush to the wall, we suggest installing the TOP OF SOUNDBAR at least 1/2” below the TV to allow the mount to lock into the keyholes properly.

**If soundbar is not snug to bracket, remove from brackets, adjust bolts in soundbar then reinsert into brackets.