Nintendo Switch OLED system and dock with white Joy-Cons in a HIDEit Switch Mount.
Limited edition Zelda Nintendo Switch wall mounted next to TV in a HIDEit Mount for Nintendo Switch.
Nintendo Switch mounted behind the TV and on the wall using HIDEit wall mount for Nintendo Switch.
HIDEit Mount for Nintendo Switch allows proper ventilation and does not trap heat.
Custom Nintendo Switch wall mounted next to TV using a HIDEit Mount for Nintendo Switch.
HIDEit Mounts makes it easy to love your space! HIDEit is an American company with over 1 million units sold globally.
HIDEit Mounts Nintendo Switch Mount. This Switch Wall Mount is Made in America by an American Company.
HIDEit Mounts Switch Bundle pack with a Switch wall mount and two controller wall mounts with the Nintendo Switch console, Joy-Con Controllers and Switch Pro Controller.
The Ultimate Nintendo Switch Dock Wall Mount Bundle. Comes with HIDEit Switch Wall Mount, 2 JoyCon Controller Mounts and 1 headset wall mount.
The Lit Bundle comes with a Nintendo Switch Wall Mount, 2 Nintendo Switch JoyCon Wall Mount, 1 Headset Wall Mount, 1 LED Strip.
Bundle the HIDEit OLED Switch Mount with 1 HIDEit Uni-C Pro Controller Mount.
5.0
Rated 5.0 out of 5 stars
5.0 Stars (209 Reviews)

HIDEit Switch | Nintendo Switch Wall Mount

$24.00
Compatible with: Nintendo Switch Dock Set, Model Number: HACACASAA; Nintendo Switch - OLED Model, Model Number: HDH-001
NOT for Nintendo Switch 2, 3rd party docking stations, Nintendo Switch Lite
Select Option

$5 US Shipping on $100+. Ships from Nevada.

  • Ships in 2 Days
  • 14-Day Returns
  • Secure Checkout

Thanks for choosing our American Small Business!

Pairs With This Mount

Complete the Setup

Mount the gear that goes with it for one clean wall.

HIDEit Uni-C

Universal Controller Wall Mount

$10.00

HIDEit Uni-H

Universal Headset Wall Mount

$15.00

HIDEit PS5

Sony PlayStation 5 and PS5 Pro Mount

$31.00

HIDEit Series X

Microsoft Xbox Series X Mount

$32.00

Switch Mount for the Nintendo Switch Dock and Nintendo Switch OLED Dock

At home or on-the-go, play how you want with the Nintendo Switch! Safely dock the Switch with the HIDEit Switch Wall Mount and avoid accidental damage. The simple design allows for easy access to the Nintendo Switch Dock and Joy-Cons. The built-in tab prevents sliding and countersunk holes ensure a flush installation, making it easy to create a clean setup. Our Switch Mount is also compatible with the Nintendo Switch OLED Model! Create your perfect gaming setup with the HIDEit Nintendo Switch Mount!

  • Compatible with Nintendo Switch + Switch OLED.
  • Built-in tab prevents Nintendo Switch console from sliding.
  • Sleek design ensures vents won’t be obstructed.
  • VESA Compatible: 75mm + 100mm, single M4 + M6 hole.
Details + Compatibility

A small percentage of consoles have a known issue with controller functionality, please contact Nintendo should you encounter an issue. Nintendo Switch sold separately. Nintendo® Switch is a registered trademark of Nintendo Co., Ltd.

Product Name: HIDEit Switch
UPC: Single 858691006203; Bundle 858691006241; USA 858691006449
Includes: (2) #8 Flat Head Drywall Screws, (2) Drywall Anchors, (2) M4 and (1) M6 VESA Screws
Dimensions: H 7.01 x L 4.21 x D 2.63 in (178.05 x 106.93 x 66.8 mm)
Released: 3/2017

COMPATIBLE WITH: Nintendo Switch Dock Set, Model Number: HACACASAA; Nintendo Switch - OLED Model, Model Number: HDH-001

NOT COMPATIBLE WITH: Nintendo Switch 2, 3rd party docking stations, Nintendo Switch Lite

Shipping + Returns
Ships Fast from U.S. Warehouses

Most orders ship within 2 business days. Shipping speed depends on the service + carrier you select. US Economy Shipping can take up to 3 weeks. Shipping times are estimates and not guaranteed.

Return Policy

We want you to love your HIDEit Mount! Returns are accepted within 14 days of delivery for store credit. Items must be unused, in original packaging, and in resalable condition. Customers are responsible for return shipping.

Making Mounts Since 2009

  • Heavy-Duty Steel

    Powder-coated steel protects your gear from scratches.

  • Snug + Secure Fit

    Shaped to fit your exact model, so your gear stays put.

  • Designed in USA

    Every HIDEit mount is designed in the USA.

How to Install
How to Install

It might seem difficult to install a HIDEit Mount, but luckily it isn’t! We provide all the necessary hardware; all you need to bring is a few tools and a keen eye for how you want your setup to look. Here’s everything you need to know about how to install a mount for a clean, professional setup.

*** Before you start, be sure to plan out your setup, remove any discs and unplug power from all components, including your TV. ***

1. Gather your tools - Drill with 3/16" drill bit (if you have one), stud finder, level, Phillips-head screwdriver, pencil, damp paper towel, and your HIDEit Hardware.

2. Determine mount location(s) - Make sure to leave space for all of your cords. To reiterate, remove discs from all devices, test your cable box for remote function. Use a level and mark your holes. Depending on the location of your install, you may need to remove your TV.

3. Check for studs - When possible, mount one side into a stud. When stud mounting do not drill pilot hole. If there's no stud, use the drywall anchors included with your mount.

Install Tip - For holes into a stud, use a mounting screw to create holes. A 3/16" drill bit is too large.

Install Tip - For holes into drywall, drill holes using a 3/16" drill bit. Hold a damp paper towel against the wall a few inches below the drill bit to catch any debris (if it's too close, it could get caught in the drill bit). No drill? Just use the mounting screw to create a pilot hole. Insert the provided drywall anchors.

4. Line up your HIDEit Mount with the anchors - Attach with provided screws and HAND tighten to prevent damage. Slide your component into your HIDEit Mount.

5. Insert your devices - We recommend to slowly insert your devices. All of our mounts are powder-coated for protection, but it's always best to be safe than sorry! Connect all the cables!

Install Tip - Don't forget to tidy up those cords!

Specific mounting instructions are listed on each product under the "How to Install" tab.

You’ve now expertly installed your HIDEit Mount! Our mounts should only take five minutes or less to install. But don’t be afraid to take longer to prep, plan and get it perfect for your setup! Now, sit back, relax and enjoy your work!

Open the full install page ›

Your Questions, Answered

Is this mount compatible with the new Nintendo Switch 2 Model?

No, this mount fits the original Nintendo Switch and Switch OLED. We are actively working on a new mount for the Switch 2. Visit our HIDEit Switch 2 product page to sign up for release information.

Is it easy to remove the dock from the Nintendo Switch wall mount?

Yes! The simple design of our Switch wall mount makes it easy to slide the dock and Switch in and out of the mount.

What are the screws for?

The drywall anchors and screws are for wall mounting your Switch console, while the included flat M4 and M6 screws are for VESA mounting.

Is this mount compatible with the Nintendo Switch OLED Model?

Yes! The Switch OLED's Dock fits our existing Switch Wall Mount.

Is overheating an issue?

Not with our Switch mount. We intentionally designed our mount with offset openings to ensure that the heat from the Nintendo Switch Dock is not trapped.

What if my TV isn't wall mounted?

No problem! With our Nintendo Switch mount you can VESA mount your Switch directly to the back of your TV, using the holes that would normally be used for the TV wall mount!

#afterHIDEit

Real Customers. Real Setups.

  • Customer's PS5 mounted on the wall beside a wall-mounted TV
  • Customer's PS5 and Xbox Series X mounted beside a TV
  • Customer game room with a wall of TVs and mounted PS5, PS4, Xbox Series X and S, Switch and controllers
  • Customer's PS5 mounted next to a TV with blue backlighting
  • Customer's Nintendo Switch 2 dock mounted under a framed Zelda poster
  • Customer's PS5 Slim and DualSense controller mounted beside a backlit TV
  • Customer media wall with mounted headsets and controllers around a backlit TV
  • Customer TV wall on wood paneling with the console mounted out of sight
  • Customer's PS5 Slim, Switch 2 and controller mounted on a white wall beside the TV
  • Customer game room with a PS5, Switch 2 and a row of mounted controllers
  • Customer game room with two TVs and a neon controller sign
  • Customer's row of mounted controllers on a yellow striped wall beside the TV

Every setup here belongs to a real customer. Share yours and you're entered in #afterHIDEit, our monthly setup contest.

#afterHIDEit Contest

Reviews

5.0
★★★★★ Based on 209 reviews
  • 5 0
  • 4 0
  • 3 0
  • 2 0
  • 1 0
Write a Review

Loading reviews...

What's Trending

Shop Best Sellers
HIDEit Switch 2 HIDEit Switch 2Nintendo Switch 2 Wall Mount$30.00 HIDEit PS5 HIDEit PS5Sony PlayStation 5 and PS5 Pro MountFrom $31.00 HIDEit HBat HIDEit HBatHorizontal Baseball Bat MountFrom $22.00 HIDEit Series X HIDEit Series XMicrosoft Xbox Series X MountFrom $32.00
Shop Best Sellers

Gaming Room Ideas + How-Tos

How-to + tips

How to Build a Floating Gamer Wall

This is the part people screenshot and send to their group chat — each console sliding into its...
Read the story ›
Setup ideas

Can You Mount a Console or PC Without Drilling Into the Wall?

VESA sets the standard hole pattern on the back of almost every monitor and TV — the same...
Read the story ›
Setup ideas

Pegboard Gaming Setup: Mount Your Gear Without Drilling Into the Wall

A pegboard gaming setup uses a wall-mounted pegboard panel as a flexible mounting surface for gaming gear
Read the story ›
Setup ideas

Brand New Day. Brand New Wall.

Spider-Man: Brand New Day is in theaters this week. And Insomniac justdropped the Fresh Start suit into Marvel's...
Read the story ›
Visit the HIDEit Blog

Since 2009

The HIDEit Story

What do you get when you add a Nintendo Wii, a few glasses of wine and a blow torch together? Usually a recipe for disaster. But in our case, it was different.

Read Our Story
Rey and Chuck of HIDEit in front of a HIDEit game wall
Read Our Story